Friday, May 31, 2013

Friday News And Views

Well, yesterday's post I seem to have stirred the pot a bit. Some great comments, (26 so far!), and lots of views. Here's a few points to follow up with....

  • Any Bike Is A Gravel Bike: Look- we do not need a gravel specific bicycle. That said, we do not need 27.5 inch wheels for enduro bikes, we do not need gears, and we do not need electronic controlled drive trains either. But ya know what? Those things make doing specific rides and tasks easier. The industry is capable of doing them, and consumers like it. Okay? So if the industry wants to pursue a gravel specific bike, I say, "get the dang thing right", and that was part of the point with yesterday's post. With the amount of hits and comments I have gotten from yesterday's post, I'd wager there is some significant interest in having a gravel specific rig, or nothing would have come of it. Right? 
  • What Gravel Is To You May Not Be What Gravel Is To Someone Else: I get that some folks see "gravel roads" in the context of where they live. That might mean mountain fire roads. That might mean backroads which are dirt only. That might be a foreign concept, since some places don't even have gravel roads for a point of reference. When I give my opinion on this sort of bicycle, it is based upon where I have ridden all across the Mid-West, which is arguably the "World Center of Gravel Roads".(<===Not my idea. Actually this was brought up by a West Coaster I recently spoke with.)  I've seen and ridden on lots of different types of gravel roads, and that's where I base my "what is best" from. It is not going to be a bicycle for everyone, (but then again, neither is a 5" travel 27.5"er enduro rig either, or a cyclocross bike, for that matter), so if you see this as a big waste of time, I get that. 
  • Brakes: I knew my thoughts on brakes would get some attention, and it did. Look- I ride disc brake bikes on gravel roads. I know lots of folks that do as well. It isn't terrible if you want those sort of brakes, but I will also stand by my take that disc brakes are overkill for gravel roads. That doesn't mean they shouldn't be offered for gravel road bikes. I just do not think it is the best way, for the reasons I detailed yesterday. (Disc brakes ARE the most marketable way to do a gravel bike though, which is an entirely different thing.)
Finally, you are going to see more "gravel road" specific bikes coming. In fact, I have it on good authority that tomorrow at the Dirty Kanza 200 there is going to be a "well known rider" astride a prototype from a "well known brand". It's just the beginning folks........


Dirty Kanza 200: Right now there are a lot of folks in Emporia Kansas, or getting there, that will be testing themselves against 200 miles of flinty goodness. I salute each and everyone of you, and wish you tailwinds and to keep the rubber side down.

I elected not to go this year. I had an open invite from the race, which I always feel weird about, (for several reasons), but the reason I can not go is just the nuts and bolts of money and time away from my job and family. I have another trip to Nebraska in three weeks or so which will eat up some time off, and also the GTDRI about two weeks after that, so adding another big trip without the family- well.....it just ain't right. For me anyway.

So, have a great ride, if you are in the DK this year, and I look forward to all the great stories that will surely be told afterward.

3GR: Well, if it isn't raining like last week, I'll be at Gates Swimming Pool parking lot in Waterloo at 8:30am for the 3GR. Cedar Falls trail network, which I utilize to ride out of town on a normal 3GR, is all inundated with this flooding, so a W'Loo departure this time again! I am thinking of doing the loop up past Denver and back down again,just in case you are coming.

 The Guitar Ted Death Ride Invitational by the Slender Fungus Cycling Association: 

July 13-14 mark your calendars and come to Eastern Iowa for a hilly son of a gun called the "GTDRI" for short. It's a no drop group ride and is being put on by the Slender Fungus Cycling Association, which are some cool cats, if I do say so, (and I do!)

One thing that "El Presidente' Ari" is asking for is that if you are coming, please say so here. Several gravel grinding aficionados have already committed, so why not you? Once the SFCA knows a bit more about what to expect for rider numbers, they will hit us back with details on lodging/camping, route, and whatnot.

While I am not privy to the route details, I've seen enough recon photos to know that you'll want to be geared low and be able to carry plenty of food and water. There will be some stops, but in July, with expected hot weather, it is always wise to plan ahead! The route should be over 100 miles and no more than 150. It'll be an all day ride fer sure!

Maybe I'll bust out the Gravel Mutt Project bike for this one!

Okay, ya'all have a great weekend, and ride those bikes!

Friday News And Views

Well, yesterday's post I seem to have stirred the pot a bit. Some great comments, (26 so far!), and lots of views. Here's a few points to follow up with....

  • Any Bike Is A Gravel Bike: Look- we do not need a gravel specific bicycle. That said, we do not need 27.5 inch wheels for enduro bikes, we do not need gears, and we do not need electronic controlled drive trains either. But ya know what? Those things make doing specific rides and tasks easier. The industry is capable of doing them, and consumers like it. Okay? So if the industry wants to pursue a gravel specific bike, I say, "get the dang thing right", and that was part of the point with yesterday's post. With the amount of hits and comments I have gotten from yesterday's post, I'd wager there is some significant interest in having a gravel specific rig, or nothing would have come of it. Right? 
  • What Gravel Is To You May Not Be What Gravel Is To Someone Else: I get that some folks see "gravel roads" in the context of where they live. That might mean mountain fire roads. That might mean backroads which are dirt only. That might be a foreign concept, since some places don't even have gravel roads for a point of reference. When I give my opinion on this sort of bicycle, it is based upon where I have ridden all across the Mid-West, which is arguably the "World Center of Gravel Roads".(<===Not my idea. Actually this was brought up by a West Coaster I recently spoke with.)  I've seen and ridden on lots of different types of gravel roads, and that's where I base my "what is best" from. It is not going to be a bicycle for everyone, (but then again, neither is a 5" travel 27.5"er enduro rig either, or a cyclocross bike, for that matter), so if you see this as a big waste of time, I get that. 
  • Brakes: I knew my thoughts on brakes would get some attention, and it did. Look- I ride disc brake bikes on gravel roads. I know lots of folks that do as well. It isn't terrible if you want those sort of brakes, but I will also stand by my take that disc brakes are overkill for gravel roads. That doesn't mean they shouldn't be offered for gravel road bikes. I just do not think it is the best way, for the reasons I detailed yesterday. (Disc brakes ARE the most marketable way to do a gravel bike though, which is an entirely different thing.)
Finally, you are going to see more "gravel road" specific bikes coming. In fact, I have it on good authority that tomorrow at the Dirty Kanza 200 there is going to be a "well known rider" astride a prototype from a "well known brand". It's just the beginning folks........


Dirty Kanza 200: Right now there are a lot of folks in Emporia Kansas, or getting there, that will be testing themselves against 200 miles of flinty goodness. I salute each and everyone of you, and wish you tailwinds and to keep the rubber side down.

I elected not to go this year. I had an open invite from the race, which I always feel weird about, (for several reasons), but the reason I can not go is just the nuts and bolts of money and time away from my job and family. I have another trip to Nebraska in three weeks or so which will eat up some time off, and also the GTDRI about two weeks after that, so adding another big trip without the family- well.....it just ain't right. For me anyway.

So, have a great ride, if you are in the DK this year, and I look forward to all the great stories that will surely be told afterward.

3GR: Well, if it isn't raining like last week, I'll be at Gates Swimming Pool parking lot in Waterloo at 8:30am for the 3GR. Cedar Falls trail network, which I utilize to ride out of town on a normal 3GR, is all inundated with this flooding, so a W'Loo departure this time again! I am thinking of doing the loop up past Denver and back down again,just in case you are coming.

 The Guitar Ted Death Ride Invitational by the Slender Fungus Cycling Association: 

July 13-14 mark your calendars and come to Eastern Iowa for a hilly son of a gun called the "GTDRI" for short. It's a no drop group ride and is being put on by the Slender Fungus Cycling Association, which are some cool cats, if I do say so, (and I do!)

One thing that "El Presidente' Ari" is asking for is that if you are coming, please say so here. Several gravel grinding aficionados have already committed, so why not you? Once the SFCA knows a bit more about what to expect for rider numbers, they will hit us back with details on lodging/camping, route, and whatnot.

While I am not privy to the route details, I've seen enough recon photos to know that you'll want to be geared low and be able to carry plenty of food and water. There will be some stops, but in July, with expected hot weather, it is always wise to plan ahead! The route should be over 100 miles and no more than 150. It'll be an all day ride fer sure!

Maybe I'll bust out the Gravel Mutt Project bike for this one!

Okay, ya'all have a great weekend, and ride those bikes!

Thursday, May 30, 2013

"It" May Never Happen

Once again, due to circumstances and the way things played out yesterday, I was doing a bunch of thinking. Which is never a good thing for you blog readers because that means I am about to download an opinion piece on something or another. So, here I go with the standard disclaimer.....

NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

Gotta have room for fatties and mud.
 What Is "It"?

The world of cycling may never quite understand, but there is room for a gravel specific bike or two from the bigger brands. The thing is, "it" may never happen, and here are some reasons why....

Tire Clearances: The gravel cyclist should have options to account for different conditions and to mitigate the rougher ride a cyclist experiences on gravel. There is one really great way to do that, and that is to allow for bigger, fatter tires than a cyclocross bike uses. My observations have shown me that tire size is somewhere between 35mm-45mm which covers most gravel grinder's needs. Not all- but most.

That means chain stays need to be a lot more accommodating than many rigs I have seen out there. The thing is, manufacturers are loathe to go big on the stays for reasons I am not really clear on. At one time I was actually told that "it wasn't possible" to make for bigger tire clearances without using stupid-long chain stays. Which was funny, because I have a bike that actually fits bigger tires than I am indicating here and has reasonably short chain stays, within what was being told to me was "acceptable".  Anyway.....

Lively, Lightweight Frames: (That aren't waaaay expensive!)

Some companies get this, but the thing is, due to over-reaching safety tests and worries about litigation, a lot of companies just plain can not offer a steel frame that would have a sweet ride and be light. So, aluminum, right? Maybe, but nice riding aluminum frames get into the same territory here with regard to "safety" and what not. An over-built aluminum frame is going to ride.....well, not as well as gravel riders would like. (Assuming gravel riders know the differences here.) So, you end up having to look at titanium and carbon, which I have no quibbles about, but they are expensive alternatives.

Too bad. I remember nice, lively steel mountain bike frames, and those will never happen again from the bigger companies either, due to similar reasons. Gravel riders may never know how good it could be unless they go custom. Again- pretty expensive.

 Geometry That Works Better For Gravel:

Head tube angles and bottom bracket drop. Those two things never quite come together for the betterment of gravel riders. Cyclocross rigs often come in with a pretty good number on the head angle, (typically 72° is commonplace), and that gets within a half a degree of what I would like to see, but you never see those bikes with a road bike-like lower bottom bracket, which would add all sorts of stability.

Loose, fast descents just really call out for a stable, easy to control handling package which the slacker head angle/lower bottom bracket would give riders. Gravel riders don't need to lean over hard and pedal through corners, so the higher bottom bracket that cyclocross rigs use is worthless on gravel. Manufacturers don't get that a road bike with a slack geometry, wide tire clearances, and a nice, shock absorbing tire are what gravel riders need. That bike seems to be too weird to contemplate. Then add in the brake thing, and well.......

A Word On Brakes:

In my opinion, gobs of power in a brake is not what gravel grinders need. You're essentially braking on a surface littered with marbles.  Locking up a wheel, (and remember kiddos- a locked up wheel is an out of control wheel), is super-easy to do on gravel. Rim brakes are lighter. Set up well they work wonders on gravel. Rim brakes can modulate for days. Adverse conditions are not a big deal with cantilevers. Plus, (and this is the biggest reason I like cantis), the frame and fork do not have to be beefed up to accommodate a disc brake mount. This is especially true on the fork, where a good, steel fork design would be totally screwed up by adding disc brake mounts. Sure....you could design a carbon fork to take care of that, and charge us accordingly. Not necessary. Not in my opinion.

And the industry has a different agenda here, where the perception is that riders "want" disc brakes, so that's where the designs and R&D will go. Too bad. It doesn't have to be so complicated, nor so expensive to work well.

So, for all those reasons and more, we may not ever see a really great design purpose built for gravel riding being sold by the mainstream companies. But then again.....

I could be all wrong about that.

"It" May Never Happen

Once again, due to circumstances and the way things played out yesterday, I was doing a bunch of thinking. Which is never a good thing for you blog readers because that means I am about to download an opinion piece on something or another. So, here I go with the standard disclaimer.....

NOTE: Large doses of "my opinion" will be handed out in gloppy dollops today. You've been forewarned.....

Gotta have room for fatties and mud.
 What Is "It"?

The world of cycling may never quite understand, but there is room for a gravel specific bike or two from the bigger brands. The thing is, "it" may never happen, and here are some reasons why....

Tire Clearances: The gravel cyclist should have options to account for different conditions and to mitigate the rougher ride a cyclist experiences on gravel. There is one really great way to do that, and that is to allow for bigger, fatter tires than a cyclocross bike uses. My observations have shown me that tire size is somewhere between 35mm-45mm which covers most gravel grinder's needs. Not all- but most.

That means chain stays need to be a lot more accommodating than many rigs I have seen out there. The thing is, manufacturers are loathe to go big on the stays for reasons I am not really clear on. At one time I was actually told that "it wasn't possible" to make for bigger tire clearances without using stupid-long chain stays. Which was funny, because I have a bike that actually fits bigger tires than I am indicating here and has reasonably short chain stays, within what was being told to me was "acceptable".  Anyway.....

Lively, Lightweight Frames: (That aren't waaaay expensive!)

Some companies get this, but the thing is, due to over-reaching safety tests and worries about litigation, a lot of companies just plain can not offer a steel frame that would have a sweet ride and be light. So, aluminum, right? Maybe, but nice riding aluminum frames get into the same territory here with regard to "safety" and what not. An over-built aluminum frame is going to ride.....well, not as well as gravel riders would like. (Assuming gravel riders know the differences here.) So, you end up having to look at titanium and carbon, which I have no quibbles about, but they are expensive alternatives.

Too bad. I remember nice, lively steel mountain bike frames, and those will never happen again from the bigger companies either, due to similar reasons. Gravel riders may never know how good it could be unless they go custom. Again- pretty expensive.

 Geometry That Works Better For Gravel:

Head tube angles and bottom bracket drop. Those two things never quite come together for the betterment of gravel riders. Cyclocross rigs often come in with a pretty good number on the head angle, (typically 72° is commonplace), and that gets within a half a degree of what I would like to see, but you never see those bikes with a road bike-like lower bottom bracket, which would add all sorts of stability.

Loose, fast descents just really call out for a stable, easy to control handling package which the slacker head angle/lower bottom bracket would give riders. Gravel riders don't need to lean over hard and pedal through corners, so the higher bottom bracket that cyclocross rigs use is worthless on gravel. Manufacturers don't get that a road bike with a slack geometry, wide tire clearances, and a nice, shock absorbing tire are what gravel riders need. That bike seems to be too weird to contemplate. Then add in the brake thing, and well.......

A Word On Brakes:

In my opinion, gobs of power in a brake is not what gravel grinders need. You're essentially braking on a surface littered with marbles.  Locking up a wheel, (and remember kiddos- a locked up wheel is an out of control wheel), is super-easy to do on gravel. Rim brakes are lighter. Set up well they work wonders on gravel. Rim brakes can modulate for days. Adverse conditions are not a big deal with cantilevers. Plus, (and this is the biggest reason I like cantis), the frame and fork do not have to be beefed up to accommodate a disc brake mount. This is especially true on the fork, where a good, steel fork design would be totally screwed up by adding disc brake mounts. Sure....you could design a carbon fork to take care of that, and charge us accordingly. Not necessary. Not in my opinion.

And the industry has a different agenda here, where the perception is that riders "want" disc brakes, so that's where the designs and R&D will go. Too bad. It doesn't have to be so complicated, nor so expensive to work well.

So, for all those reasons and more, we may not ever see a really great design purpose built for gravel riding being sold by the mainstream companies. But then again.....

I could be all wrong about that.

Wednesday, May 29, 2013

Gravel Mutt Project: Camo Madness

Psychedelic Camo
I mentioned in my last post that I had made some significant progress on the Gravel Mutt. Well, I have, but I took a step backward as well. Here's the deal: I am not a painter. Yet! 

Technically I am cutting a lot of corners, but that is for a reason. See- I am ultimately trying to demonstrate that one does not have to go to great lengths to have a, (sorta), cool gravel grinder bicycle. Low expenditure and a little time invested, and here ya go: A gravel grinder bicycle that can tackle anything you throw at it. That's the premise here. While things like a Salsa Cycles Warbird are cool, not everyone is ready and/or able, (or may not even want to),  to throw down that kind of coin to try out the gravel road scene.

So, back to the painting issues. I thought I cleaned up the metal before I painted it well enough, but something I was using must have had a small amount of oil on it, which was just enough to make the paint do some pretty weird, and cool, things. Weird and cool are okay if that is what you want, but I wasn't looking for a crackle finish or for mad pores/orange peel. Not all the frame did this, but in certain areas, there will be some sanding and repainting going on. I consider it a "second chance" of sorts at the theme for the paint. A "take two", if you will.

So, I will forge ahead, getting some clean, new wet/dry paper and I'll wet sand it down to smooth, then re-shoot the thing. That shouldn't be too awful long from now, considering trails are wet, it is forecast to rain almost everyday for the next week, and I should have plenty of time on my hands!

Gravel Mutt Project: Camo Madness

Psychedelic Camo
I mentioned in my last post that I had made some significant progress on the Gravel Mutt. Well, I have, but I took a step backward as well. Here's the deal: I am not a painter. Yet! 

Technically I am cutting a lot of corners, but that is for a reason. See- I am ultimately trying to demonstrate that one does not have to go to great lengths to have a, (sorta), cool gravel grinder bicycle. Low expenditure and a little time invested, and here ya go: A gravel grinder bicycle that can tackle anything you throw at it. That's the premise here. While things like a Salsa Cycles Warbird are cool, not everyone is ready and/or able, (or may not even want to),  to throw down that kind of coin to try out the gravel road scene.

So, back to the painting issues. I thought I cleaned up the metal before I painted it well enough, but something I was using must have had a small amount of oil on it, which was just enough to make the paint do some pretty weird, and cool, things. Weird and cool are okay if that is what you want, but I wasn't looking for a crackle finish or for mad pores/orange peel. Not all the frame did this, but in certain areas, there will be some sanding and repainting going on. I consider it a "second chance" of sorts at the theme for the paint. A "take two", if you will.

So, I will forge ahead, getting some clean, new wet/dry paper and I'll wet sand it down to smooth, then re-shoot the thing. That shouldn't be too awful long from now, considering trails are wet, it is forecast to rain almost everyday for the next week, and I should have plenty of time on my hands!

Tuesday, May 28, 2013

....And All I Got Was This iPhone Pic!

Finally! A ride happened.....
Well, that was a typical Memorial Day Weekend. Rain, thunder, lightning, high winds, and flooding all weekend until Monday fore noon. Then it finally dried up enough to get out and enjoy some gravel.

Saturday I awoke to grumbling skies and rain, so I didn't go out on the 3GR. Props to those who may have ridden in the rain, but I am not motivated to go out and do that. So, I waited it out to see if things would clear up, and for a time in the afternoon, it did, but I was obliged to do some family time. Not a problem for me to drop a ride to spend time with the family at all, so no big deal.

I did get a lot of work done on the Gravel Mutt, (which I will detail later), so I was pleased to get that project pushed along a little further. There will be another sanding, painting, and hopefully thread chasing session after this. Then I will move on to assembly. I also did some tire swapping on the gravel wheels and on the Project White Inbred bike.

Sunday I played bass at church, then back to the house to meet with a guy who is going to help fix our kitchen cieling, and then I watched a race. Of course, it was raining cats and dogs with high winds most of the day here anyway, so no bike riding was even contemplated for Sunday. Monday I grilled out for lunch, then I hit the gravel South of town. It was so humid I felt damp the entire ride. The gravel was correspondingly mushy and soft in a lot of places, but it was riding a bike time, and I was on it!

Both my cameras were down on battery power simultaneously, so all I got from the ride was a single iPhone pic. It shows the somber mood of the countryside well enough though. Lots of standing water everywhere. Black Hawk Creek has topped the banks and spread over the low lying farm fields adjacent to its banks making for a sight. Almost as if there were a big lake South of town now! What a contrast to a year ago when it was mid-90's, blazing Sun, and dry for weeks on end. Either way, I'll take this ride and be glad. I really needed it!

....And All I Got Was This iPhone Pic!

Finally! A ride happened.....
Well, that was a typical Memorial Day Weekend. Rain, thunder, lightning, high winds, and flooding all weekend until Monday fore noon. Then it finally dried up enough to get out and enjoy some gravel.

Saturday I awoke to grumbling skies and rain, so I didn't go out on the 3GR. Props to those who may have ridden in the rain, but I am not motivated to go out and do that. So, I waited it out to see if things would clear up, and for a time in the afternoon, it did, but I was obliged to do some family time. Not a problem for me to drop a ride to spend time with the family at all, so no big deal.

I did get a lot of work done on the Gravel Mutt, (which I will detail later), so I was pleased to get that project pushed along a little further. There will be another sanding, painting, and hopefully thread chasing session after this. Then I will move on to assembly. I also did some tire swapping on the gravel wheels and on the Project White Inbred bike.

Sunday I played bass at church, then back to the house to meet with a guy who is going to help fix our kitchen cieling, and then I watched a race. Of course, it was raining cats and dogs with high winds most of the day here anyway, so no bike riding was even contemplated for Sunday. Monday I grilled out for lunch, then I hit the gravel South of town. It was so humid I felt damp the entire ride. The gravel was correspondingly mushy and soft in a lot of places, but it was riding a bike time, and I was on it!

Both my cameras were down on battery power simultaneously, so all I got from the ride was a single iPhone pic. It shows the somber mood of the countryside well enough though. Lots of standing water everywhere. Black Hawk Creek has topped the banks and spread over the low lying farm fields adjacent to its banks making for a sight. Almost as if there were a big lake South of town now! What a contrast to a year ago when it was mid-90's, blazing Sun, and dry for weeks on end. Either way, I'll take this ride and be glad. I really needed it!

Monday, May 27, 2013

A Memorial Day Message From The Way-Back Machine

Four years ago, I wrote the following post on this blog. It seemed that it is as pertinent today as it was then, so why bother re-writing something similar? Here it is in its entirety.....

The Weekend When It Always Rains

Memorial Day weekend. Yeah....the opening salvo of summer. That weekend that signals the start of camping out doors, bar-b-cues, the opening of swimming pools, and school about to end for the summer. Oh yeah..........and one other thing.........rain!

I can't think of a better "rain magnet" than to declare a late May weekend as Memorial Day. Since I've been a kid, (a long, long time ago........) this weekend gets rained on more than not. Weird, but true.

Of course, if you take time to think about it, the rain may be appropriate. The whole idea of Memorial Day isn't for what I started this post out with. No, Memorial Day, originally called Decoration Day, is a day of remembrance for those who have died in our nation's service. In that sense, maybe a solemn gray rainy day is a reminder. A way for us to be prodded into stopping for a moment to recall the sacrifices of those who gave all. (If you want to find out more about the true meaning of this weekend, then check out this.)

So maybe while you are out on a ride this weekend, maybe you could stop for a moment, and remember. It is because of the sacrifices of many men and women that we can enjoy the freedom we have. One of those freedoms being the enjoyment of riding a bicycle.

I hope you all enjoy your weekend, ride your bicycles, and remember.

A Memorial Day Message From The Way-Back Machine

Four years ago, I wrote the following post on this blog. It seemed that it is as pertinent today as it was then, so why bother re-writing something similar? Here it is in its entirety.....

The Weekend When It Always Rains

Memorial Day weekend. Yeah....the opening salvo of summer. That weekend that signals the start of camping out doors, bar-b-cues, the opening of swimming pools, and school about to end for the summer. Oh yeah..........and one other thing.........rain!

I can't think of a better "rain magnet" than to declare a late May weekend as Memorial Day. Since I've been a kid, (a long, long time ago........) this weekend gets rained on more than not. Weird, but true.

Of course, if you take time to think about it, the rain may be appropriate. The whole idea of Memorial Day isn't for what I started this post out with. No, Memorial Day, originally called Decoration Day, is a day of remembrance for those who have died in our nation's service. In that sense, maybe a solemn gray rainy day is a reminder. A way for us to be prodded into stopping for a moment to recall the sacrifices of those who gave all. (If you want to find out more about the true meaning of this weekend, then check out this.)

So maybe while you are out on a ride this weekend, maybe you could stop for a moment, and remember. It is because of the sacrifices of many men and women that we can enjoy the freedom we have. One of those freedoms being the enjoyment of riding a bicycle.

I hope you all enjoy your weekend, ride your bicycles, and remember.

Saturday, May 25, 2013

Gravel Mutt Project: The Front End

I started working over the fork for the Gravel Mutt. At one point, I was going to be getting a Surly Cross Check threadless fork and a new headset, but......that isn't the "mutt way" to be doing things, now is it? No. It is not the Mutt Way. The Mutt Way is using the binned parts and cheaply gotten bits to build a workhorse bicycle.

Using the original fork and headset would be fine, but this presented a bit of a problem. The "old way" of doing a stem, (quill style), generally doesn't use a face plate. When they do, they are ug-a-leeee! Plus, I may end up with a 31.8mm handle bar, so this made me go the route of a quill adapter.

The quill adapter is clean looking, and allows me several choices in stems which can suit any drop bar handle bar, and look pretty good doing it. Cheap too. Besides, it isn't a new idea at all. Early mountain bike builders would do a similar thing but would actually braze in a stub into the steer tube that extended above the threaded head set. A "clip on" stem would then be used, and the top cap? It usually was a coin! Modern adaptations are similar, but look more like a standard threadless steerer.

As I am sanding down the paint for priming and finishing, I note that the drop outs are Tange ones on the fork ends. Probably a Tange fork too, I am guessing. That's nice. The frame tubes are True Temper. All steel means a solid gravel grinder base. Abuse friendly, no worries about scratches, dings, or damage. If I like it so much when it, if ever, needs repair, it can be done at a reasonable cost.

Random thought: Paint frame and fork flat black and call the bike "Crow Molly". 

No? 

Quill adapter
 Hopefully I will be making some major progress on this over the three day weekend. I would like to throw on some paint, and if it goes well, I might be able to assemble the thing in a week or so, once the paint cures.

Then the build should pretty much go quickly. The plan is to go with a 1 X 9 drive train. One bar end shifter, a set of Tektro RL 520 levers is sitting around here somewhere, and I may need to score some better cantilevers.

I found a nice Ritchey seat post in the bin, and to top that off I want to get a B-17 or possibly a Flyer. The handle bars may be something I have laying around, or a new set of Cowbell 2's. I really like Cowbells! They are the bars I use on the BMC. Wheels will be the aforementioned XTR/Salsa Delgado hoops shod with whatever tire I need to be riding at the time. (The bike will be used for testing stuff for Gravel Grinder News when necessary.) Otherwise I plan on just using this one for the 3GRs and maybe some night time riding this summer. Bad weather will see this one on the roads as well. Hmm.......maybe it needs fenders too.....

The bike will then get outfitted with a frame bag, a top tube bag, and a couple of bottle cages so it'll be ready for long or short distances at the drop of a hat. That's about it, but before I get there, I have a lot of work ahead of me. Details to come. For now, it's sanding and painting time.

Gravel Mutt Project: The Front End

I started working over the fork for the Gravel Mutt. At one point, I was going to be getting a Surly Cross Check threadless fork and a new headset, but......that isn't the "mutt way" to be doing things, now is it? No. It is not the Mutt Way. The Mutt Way is using the binned parts and cheaply gotten bits to build a workhorse bicycle.

Using the original fork and headset would be fine, but this presented a bit of a problem. The "old way" of doing a stem, (quill style), generally doesn't use a face plate. When they do, they are ug-a-leeee! Plus, I may end up with a 31.8mm handle bar, so this made me go the route of a quill adapter.

The quill adapter is clean looking, and allows me several choices in stems which can suit any drop bar handle bar, and look pretty good doing it. Cheap too. Besides, it isn't a new idea at all. Early mountain bike builders would do a similar thing but would actually braze in a stub into the steer tube that extended above the threaded head set. A "clip on" stem would then be used, and the top cap? It usually was a coin! Modern adaptations are similar, but look more like a standard threadless steerer.

As I am sanding down the paint for priming and finishing, I note that the drop outs are Tange ones on the fork ends. Probably a Tange fork too, I am guessing. That's nice. The frame tubes are True Temper. All steel means a solid gravel grinder base. Abuse friendly, no worries about scratches, dings, or damage. If I like it so much when it, if ever, needs repair, it can be done at a reasonable cost.

Random thought: Paint frame and fork flat black and call the bike "Crow Molly". 

No? 

Quill adapter
 Hopefully I will be making some major progress on this over the three day weekend. I would like to throw on some paint, and if it goes well, I might be able to assemble the thing in a week or so, once the paint cures.

Then the build should pretty much go quickly. The plan is to go with a 1 X 9 drive train. One bar end shifter, a set of Tektro RL 520 levers is sitting around here somewhere, and I may need to score some better cantilevers.

I found a nice Ritchey seat post in the bin, and to top that off I want to get a B-17 or possibly a Flyer. The handle bars may be something I have laying around, or a new set of Cowbell 2's. I really like Cowbells! They are the bars I use on the BMC. Wheels will be the aforementioned XTR/Salsa Delgado hoops shod with whatever tire I need to be riding at the time. (The bike will be used for testing stuff for Gravel Grinder News when necessary.) Otherwise I plan on just using this one for the 3GRs and maybe some night time riding this summer. Bad weather will see this one on the roads as well. Hmm.......maybe it needs fenders too.....

The bike will then get outfitted with a frame bag, a top tube bag, and a couple of bottle cages so it'll be ready for long or short distances at the drop of a hat. That's about it, but before I get there, I have a lot of work ahead of me. Details to come. For now, it's sanding and painting time.

Friday, May 24, 2013

Friday News And Views

Candy Smokes & Processed Beef Products!
It's the big weekend holiday and everyone will be scrambling to recreate. Lots of barbeque, beer, and whatever else trips yer trigger. But just for a moment, let's not forget why we're getting to do all these crazy things in the U.S. of A. these days.

Our folks that served in uniform, giving the ultimate sacrifice in many cases, deserve our thanks and recognition. Say thanks to a Veteran, or at least make a special note of thanks in a way that seems significant to you at some point this weekend. It's the least we can do.....

More Stories Added: Just an update to a past Friday News And Views where I listed all the T.I.V9 stories and accounts I had at the time. There are more added now, in case you want to check it out. If anyone knows of accounts that are not listed there and want to suggest adding them, just comment here or hit me with an e-mail.

A Mule Kickin' In The Stall: As most of you cycling geeks are aware of, this is the midst of the Pro Cycling season and local criteriums are on at full tilt. It is with this in mind that I would like to point out the most recent "Bicycle Times", (edition #23), which just hit my mailbox today. (I know......a paper magazine! They still exist!) Anyway, the publisher, one Maurice Teirney, of "Dirt Rag" fame, writes a letter flaming Pro Cycling and its deleterious effects on riders of the more common cloth and on the cycling industry at large. The letter starts out with "To hell with pro cycling!" and rants on from there. Definitely worth reading, if you get a chance.

I would agree with much of Mr. Teirney's points, but I also see a couple things worth noting. One: Big Maurice is a mountain bike dude from way back. (In fact, he's in the MTB Hall of Fame, if you didn't know.) There has always been a bit of "anti-roadie" in the culture of mountain biking, and I'm certain Mr. Teirney is steeped in that culture. Secondly- pro racing has paid his rent, at least in part,  for many years, so I find it interesting, and a bit ironic, that he would so vehemently go after Pro Road Cycling.

That said- I get why he's peeved too. Well......go read it if you can. That's "Bicycle Times" issue #23, page 9.

3GR:

This week the ride is being moved again!  Due to high water this time, the 3GR will once again start from Gates Park swimming pool parking lot at 8:30am tomorrow. It sounds like there is a 50/50 chance there may be a thunder storm late in the morning, so I will be keeping an eye on the sky, but as of now, the ride is on.

I am not sure anyone will show up, because it is a Holiday weekend, but I will be there and likely on the BMC. I wanted to ride the Vaya, but I discovered that an odd sensation at the pedals turned out to be a slightly loose crank arm. I haven't taken it off to inspect it yet, but I fear the splines are wallowed out and that is not good.

So, I'll look into that later into the weekend, but for now it'll be the ol', reliable Black Mountain Cycles rig. Which needs a new bottom bracket, by the way. I should do something about that before it becomes "critical"! For some reason I want to put a Chris King in it and replace the head set with a King unit as well. Both silver, of course. That bike is worth that upgrade!

Friday News And Views

Candy Smokes & Processed Beef Products!
It's the big weekend holiday and everyone will be scrambling to recreate. Lots of barbeque, beer, and whatever else trips yer trigger. But just for a moment, let's not forget why we're getting to do all these crazy things in the U.S. of A. these days.

Our folks that served in uniform, giving the ultimate sacrifice in many cases, deserve our thanks and recognition. Say thanks to a Veteran, or at least make a special note of thanks in a way that seems significant to you at some point this weekend. It's the least we can do.....

More Stories Added: Just an update to a past Friday News And Views where I listed all the T.I.V9 stories and accounts I had at the time. There are more added now, in case you want to check it out. If anyone knows of accounts that are not listed there and want to suggest adding them, just comment here or hit me with an e-mail.

A Mule Kickin' In The Stall: As most of you cycling geeks are aware of, this is the midst of the Pro Cycling season and local criteriums are on at full tilt. It is with this in mind that I would like to point out the most recent "Bicycle Times", (edition #23), which just hit my mailbox today. (I know......a paper magazine! They still exist!) Anyway, the publisher, one Maurice Teirney, of "Dirt Rag" fame, writes a letter flaming Pro Cycling and its deleterious effects on riders of the more common cloth and on the cycling industry at large. The letter starts out with "To hell with pro cycling!" and rants on from there. Definitely worth reading, if you get a chance.

I would agree with much of Mr. Teirney's points, but I also see a couple things worth noting. One: Big Maurice is a mountain bike dude from way back. (In fact, he's in the MTB Hall of Fame, if you didn't know.) There has always been a bit of "anti-roadie" in the culture of mountain biking, and I'm certain Mr. Teirney is steeped in that culture. Secondly- pro racing has paid his rent, at least in part,  for many years, so I find it interesting, and a bit ironic, that he would so vehemently go after Pro Road Cycling.

That said- I get why he's peeved too. Well......go read it if you can. That's "Bicycle Times" issue #23, page 9.

3GR:

This week the ride is being moved again!  Due to high water this time, the 3GR will once again start from Gates Park swimming pool parking lot at 8:30am tomorrow. It sounds like there is a 50/50 chance there may be a thunder storm late in the morning, so I will be keeping an eye on the sky, but as of now, the ride is on.

I am not sure anyone will show up, because it is a Holiday weekend, but I will be there and likely on the BMC. I wanted to ride the Vaya, but I discovered that an odd sensation at the pedals turned out to be a slightly loose crank arm. I haven't taken it off to inspect it yet, but I fear the splines are wallowed out and that is not good.

So, I'll look into that later into the weekend, but for now it'll be the ol', reliable Black Mountain Cycles rig. Which needs a new bottom bracket, by the way. I should do something about that before it becomes "critical"! For some reason I want to put a Chris King in it and replace the head set with a King unit as well. Both silver, of course. That bike is worth that upgrade!

Thursday, May 23, 2013

A Bit Wet In Spots

Check!
Okay, this is your notice that "Camp Ingawanis South Side Trails" is now going to be known as "Ingawanis Woods". Officially that happens on June 1st, but I am jumping the gun! The Scouts sold the parcel of land off to Bremer County last fall and the transfer takes effect on 6-1-13.

With that bit of business out of the way, I will continue with my little story of an unusual ride out there Wednesday. Unusual because of the heavy rains received up North on Sunday night that added up to 5-6 inches of rain fall and flooded the Cedar River. That moved downstream to us and the crest was early Wednesday morning, a few hours before I went up to ride.

There is a lower section of the trails up there that I knew would be unrideable, and has been unrideable for quite sometime now due to the higher water levels this Spring. I figured that was off the menu, but I hadn't gotten a half a mile in before my first check at a ravine crossing. There was a short work around, but then another 100 yards or so I was stopped dead in my tracks and had to turn tail and head back where I started. I wasn't about to give up on my riding opportunity just yet though.

Higher ground
I tried heading up towards the Eagle Lodge, but it was pretty muddy, and I got out of there as soon as I ever could. Heading up higher, I found that the trails were actually in really great shape. There are a few decent hills out there which rise above the river level far enough that I was finding some decent trail, albeit in an unconventional, (for me), order of experience. Basically, I was going what I would call "backwards" on the loop.

I had heard of a new loop cut in as well, and it wasn't long before I found the fresh cut-in trail. Fresh made trail, (at least in Iowa), is always a chore to ride. The ground, which generally hasn't seen any traffic whatsoever, is soft, loamy, and very irregular. This trail section had been cleared, but very few bicycles had been on it yet. Ooof! Gear down! Trundling along, I was happy just to be able to check it out, and find it all above water!

This new trail impressed me in two ways: First- it will be a flowy, fast trail once it gets "burned in". A great single speeder's section, if I do say so myself. Secondly, it is longer than I expected. This is a big section of trail and my hats off to Karmen who, (as far as I know), pretty much single handedly cut this in. Nice work!

And one other thing- it's clearly "jungle season" again. The underbrush is growing at a mad rate, and soon will be overtaking several spots on the trails. Crazy weather we're having here. Only three weeks ago it snowed!

A Bit Wet In Spots

Check!
Okay, this is your notice that "Camp Ingawanis South Side Trails" is now going to be known as "Ingawanis Woods". Officially that happens on June 1st, but I am jumping the gun! The Scouts sold the parcel of land off to Bremer County last fall and the transfer takes effect on 6-1-13.

With that bit of business out of the way, I will continue with my little story of an unusual ride out there Wednesday. Unusual because of the heavy rains received up North on Sunday night that added up to 5-6 inches of rain fall and flooded the Cedar River. That moved downstream to us and the crest was early Wednesday morning, a few hours before I went up to ride.

There is a lower section of the trails up there that I knew would be unrideable, and has been unrideable for quite sometime now due to the higher water levels this Spring. I figured that was off the menu, but I hadn't gotten a half a mile in before my first check at a ravine crossing. There was a short work around, but then another 100 yards or so I was stopped dead in my tracks and had to turn tail and head back where I started. I wasn't about to give up on my riding opportunity just yet though.

Higher ground
I tried heading up towards the Eagle Lodge, but it was pretty muddy, and I got out of there as soon as I ever could. Heading up higher, I found that the trails were actually in really great shape. There are a few decent hills out there which rise above the river level far enough that I was finding some decent trail, albeit in an unconventional, (for me), order of experience. Basically, I was going what I would call "backwards" on the loop.

I had heard of a new loop cut in as well, and it wasn't long before I found the fresh cut-in trail. Fresh made trail, (at least in Iowa), is always a chore to ride. The ground, which generally hasn't seen any traffic whatsoever, is soft, loamy, and very irregular. This trail section had been cleared, but very few bicycles had been on it yet. Ooof! Gear down! Trundling along, I was happy just to be able to check it out, and find it all above water!

This new trail impressed me in two ways: First- it will be a flowy, fast trail once it gets "burned in". A great single speeder's section, if I do say so myself. Secondly, it is longer than I expected. This is a big section of trail and my hats off to Karmen who, (as far as I know), pretty much single handedly cut this in. Nice work!

And one other thing- it's clearly "jungle season" again. The underbrush is growing at a mad rate, and soon will be overtaking several spots on the trails. Crazy weather we're having here. Only three weeks ago it snowed!

Wednesday, May 22, 2013

The Elusive Promise Of Carbon Fiber: Wheels

Last week I wrote about this subject in relation to bicycle frames for 29"ers. Today I want to talk about another major component that carbon fiber is used for: wheels.

Does carbon make wheels "better"?
Several years ago, 29"ers were not getting the "best" engineering, tech, or features like the smaller 26"ers were. Back then, (I am talking like '07-'08), you could get on a 29"er, slam it into a corner, and most likely you would feel a lot of wheel flex. Aluminum extrusions for 29"ers were mostly scaled up 26 extrusions and not specifically designed for the stresses that bigger wheels cause when riders do that mountain biking thing. The answer back then was carbon.

At that time, a Utah based company named "Edge Composites", (Now Enve), rolled out a couple carbon 29"er hoops that radically changed how riders would perceive the 29"er handling traits. The Edge wheels were stiffer. Way stiffer than anything else out there at the time. Yes- they were, ( and still are), super expensive. But if you could afford them, they would radicalize your 29"er experience. In fact, it took frames a while to catch up to how far Edge had taken the possibilities for frame stiffness and wheel rigidity in concert with each other.

But since then, aluminum designs for wheels in the plus size have come a long way. The gulf between aluminum and carbon in terms of ride performance has narrowed dramatically. Is carbon fiber even worth it anymore for 29"er wheels?

Aluminum rims have come a long way for 29"ers
Case in point: SRAM introduced some new wheels recently- the Roam and Rail wheels, (see here), and you have a direct comparison between what you get and what you don't get, (at least on paper), with comparably designed and purposed aluminum and carbon rims.

The Roam 60, a carbon rimmed 29"er wheel weighs in at 1625g, has a 28mm outer/21mm inner rim dimension, and costs $2199.00. Now the similar Roam 50, with an aluminum rim, weighs 1610 gms, has a 25 outer/ 21mm inner rim dimension, and sells for $1072.00. You can see that weight, inner rim dimension, and the cost are the three specs that jump out here.

The aluminum Roam 50 actually weighs less, has the same inner rim dimension, and is over a grand cheaper. To be fair, SRAM says the carbon rim on the Roam 60 actually weighs 10 grams less than the aluminum Roam 50 rim, but so what? (You can not buy just rims here, right?) And what's 10 grams versus saving a grand? Again- SRAM has said the Roam 60 is stronger. (Interestingly, the word stiffer was not used to describe the Roam 60 rim versus the Roam 50 rim, but I don't know that it is not stiffer.)

Well, you can argue the minutiae all you want, but the difference in price is not minute. The difference in performance? Maybe not so much, eh? It will be interesting to see, but again- Carbon doesn't automatically call out "better" here. And even if it is, by a little bit, the costs are dramatically different which seems to point to less value in the carbon format. Thinking about some of the other details on those SRAM rims brings this out even more.

And not all carbon rims are appointed or perform similarly, I get that. However; there are not too many companies making such similar wheel models in carbon and aluminum. In this case, the promise of carbon fiber seems to have a flat taste in the mouth.  

The Elusive Promise Of Carbon Fiber: Wheels

Last week I wrote about this subject in relation to bicycle frames for 29"ers. Today I want to talk about another major component that carbon fiber is used for: wheels.

Does carbon make wheels "better"?
Several years ago, 29"ers were not getting the "best" engineering, tech, or features like the smaller 26"ers were. Back then, (I am talking like '07-'08), you could get on a 29"er, slam it into a corner, and most likely you would feel a lot of wheel flex. Aluminum extrusions for 29"ers were mostly scaled up 26 extrusions and not specifically designed for the stresses that bigger wheels cause when riders do that mountain biking thing. The answer back then was carbon.

At that time, a Utah based company named "Edge Composites", (Now Enve), rolled out a couple carbon 29"er hoops that radically changed how riders would perceive the 29"er handling traits. The Edge wheels were stiffer. Way stiffer than anything else out there at the time. Yes- they were, ( and still are), super expensive. But if you could afford them, they would radicalize your 29"er experience. In fact, it took frames a while to catch up to how far Edge had taken the possibilities for frame stiffness and wheel rigidity in concert with each other.

But since then, aluminum designs for wheels in the plus size have come a long way. The gulf between aluminum and carbon in terms of ride performance has narrowed dramatically. Is carbon fiber even worth it anymore for 29"er wheels?

Aluminum rims have come a long way for 29"ers
Case in point: SRAM introduced some new wheels recently- the Roam and Rail wheels, (see here), and you have a direct comparison between what you get and what you don't get, (at least on paper), with comparably designed and purposed aluminum and carbon rims.

The Roam 60, a carbon rimmed 29"er wheel weighs in at 1625g, has a 28mm outer/21mm inner rim dimension, and costs $2199.00. Now the similar Roam 50, with an aluminum rim, weighs 1610 gms, has a 25 outer/ 21mm inner rim dimension, and sells for $1072.00. You can see that weight, inner rim dimension, and the cost are the three specs that jump out here.

The aluminum Roam 50 actually weighs less, has the same inner rim dimension, and is over a grand cheaper. To be fair, SRAM says the carbon rim on the Roam 60 actually weighs 10 grams less than the aluminum Roam 50 rim, but so what? (You can not buy just rims here, right?) And what's 10 grams versus saving a grand? Again- SRAM has said the Roam 60 is stronger. (Interestingly, the word stiffer was not used to describe the Roam 60 rim versus the Roam 50 rim, but I don't know that it is not stiffer.)

Well, you can argue the minutiae all you want, but the difference in price is not minute. The difference in performance? Maybe not so much, eh? It will be interesting to see, but again- Carbon doesn't automatically call out "better" here. And even if it is, by a little bit, the costs are dramatically different which seems to point to less value in the carbon format. Thinking about some of the other details on those SRAM rims brings this out even more.

And not all carbon rims are appointed or perform similarly, I get that. However; there are not too many companies making such similar wheel models in carbon and aluminum. In this case, the promise of carbon fiber seems to have a flat taste in the mouth.  

Tuesday, May 21, 2013

GTDRI '13: An Introduction

From the 2012 GTDRI
What It Is: 

Okay, it is time to start thinking about the upcoming "Guitar Ted Death Ride Invitational" again.  This year's event is happening on July 13-14th, 2013.

Okay- every year the name of this ride causes confusion. Here's the deal: The ride is FREE. ANYONE is invited that wants to ride a lot of challenging gravel. Maybe a 100 miles or more in one crack. Yep. Maybe less if the weather dictates. It is a NO DROP group ride. Everyone sticks together, and this IS NOT A RACE!!  Feel like having a good time in the hot sun on some hilly, challenging Iowa gravel with like-minded individuals? This might be a great ride for you to show up to.



Where It Is: This year I am doing something totally new and different for me. I am turning the reins over to the Slender Fungus Cycling Association, a tight knit bunch of cycling aficionados that have a strong love for Iowa and gravel roads. They have already scouted out roads in Jackson County, Iowa, and will be providing some clearer details on the route and what not soon. Stay tuned....

When It Is: The ride has been on Saturday in recent years, but since a couple of the guys on the Slender Fungus squad are bike shop rats, the ride will be on Sunday this year so they can attend and not miss work on Saturday. This was the way it used to be for a while when I would camp oout on Saturday night before the gig and go home afterward. So, on Saturday night....(place yet to be determined).... I will be camping out and anyone that wants to is welcomed to stop by and hang out for some conversations and maybe a few adult beverages. (But I am going to limit that since in years past we would drink too much and stay up too late......with the next day's ride being negatively affected. )

The ride typically starts at sun up, so that's the time we'll be taking off. Generally that's about 6am, but if the SFCA says we need to get a head start, that may be moved up. Generally we ride till sundown. It's an all day affair! Stay tuned for more details as I get them........